January 6, 2022
Description
I broke my sunglasses and I wanted to order a new frame, because the glasses itself had some diopter, but unfortanely mr.spex doesnt sell them anymore... So I tried my best and made a model. Its for use with the Polaroid PLD D343 807 glasses.
As a hinge I used some 1,6 x 30 mm Nails (DIN1151) Nails I had laying around and trimmed them with a side cutter. But I think you can also use some 1,75mm filament and melt it on the ends.
But I attatched the fusion360 file, so you can make it fit your glasses. Just edit the first sketch at the "Gestell" component.
Maybe you have to edit the sketches of the sweepings, too. I had some problems with them... :D
Printer Brand:
Anet
Printer:
A8
No
Supports:
No
0,15
Infill:
25%
Cutting edges
I had to cut the edges, that it`s more comfortable for your nose
Bend the frame
Maybe you have to bend the frame. In my case I had to, because the original frame was bend. I bend some sheet metal as a guide and bend the frame it with a geatgun.
Cut the nails
I took some nals, I had laying around and cut them with side cutters right after the hinge.
The nails I used were 1,6 x 30 mm Nails (DIN1151)
Bend the temples
For the last step I heated the temples at one spot and bend them to get a better hold on your head.
License:
Creative Commons — Attribution
JannisJFry
