3 point Bearing guide for bandsaw

This is a three roller bandsaw guide for a VEB 750 A, which replaces the pertinax guides. 

You need:

5x 608z roller bearing

1x 607zz roller bearing

4x M8x20 (needs to be hex head)

4x M8 washer

4x M8 nut

2x M6x60 (needs to be hex head)

1x M6x30 (head does not matter but maybe needs to be ground down to 28mm)

1x M6 washer

3x M6 nut

I made an adapter from M6 bolt to the 7mm hole in the 607zz bearing, because M7 is not common, but the roller was a good fit. Sadly the 608z was not able to be fitted into the machine due to no room. Adapter not available as of now.

Print in PETG, 3 primeter and 25% infill.