OG Xbox 70mm Nexus Fan mod lower plug

This is the missing lower piece to a 70m Nexus fan mod for the OG Xbox.

It goes at the bottom and fills in the 2 holes, then the other mount holds the fan over it.
The 70mm Nexus fan mod is here:
https://www.printables.com/model/79247-original-xbox-70mm-nexus-fan-adapter-and-mount
The 40 Noctua fan mount is here:
https://www.printables.com/model/79249-original-xbox-10-gpu-40mm-fan-adapter

Here are/were the fan listings at the time.
https://www.amazon.com/dp/B003PNLRLU
https://www.amazon.com/dp/B009NQLT0M

I used the screws from the 40mm fan to hold the 70mm Nexus fan in the mount and the rubber mounts to hold the 40mm in its mount.

I run a custom bios named Cerbios and I use it to set the fan speed to 40%, it keeps the OG Xbox at about the same temp as the original fan but much quieter and uses a .ini file to set the bios options (like fan speed) instead of needing to flash the bios every time I want to make a change.