Parametric Case for Orienteering Compass (Suunto A30)

As I did not find any similar model, decided to create this simple case to store my compass. It is modeled after the Suunto A30, so for other compasses the parameters might need changing. 

Parameters:

• Length - Sets the length of the compass without including the semi-circle. Measured at the end of the the straight long edge of the compass, before it turns into a semi-circle.
• Width - Sets width of the compass. 
• WallThick - Sets the thickness of the walls of the case.

Suggested print settings:

• FLEX filament;
• 0.2 Structural on the Mini+ IS;
• 15% infill;
• 2 perimeters.

If printing in PLA or PETG, check printer tolerances and increase lid by 1-2% to make sure that it closes.

Happy printing! If you print, please post a make.