Flora - Nature-inspired LED Table Lamp

Flora is an LED table lamp that combines functionality with customizable design. Featuring a tripod base with a 6mm through-hole for the power cable, Flora is designed to hold an E14 threaded lamp holder with a dual thermoplastic locking ring, compatible with G45-type 4.5W LED bulbs (tested with this model).

Materials Required

The only additional materials not included with the model are:

• A power cable with switch for table lamps,
• A threaded E14 lamp holder,
• Two locking rings.

Easy and Intuitive Assembly

To assemble Flora, simply follow these steps:

1. Position the tripod: Place the tripod on a stable surface.
2. Insert the cup cover: Position the cup cover with the recess facing upwards over the tripod, threading the tripod’s screw through the hole in the cup.
3. Pass the power cable: Thread the power cable through the hole from underneath the tripod.
4. Install the lamp holder: Insert the base of the lamp holder onto the tripod screw and tighten it fully. Connect the power cable wires to the lamp holder body and attach it to the base.
5. Tighten the first ring: Secure the first locking ring tightly onto the lamp holder body.
6. Attach the leaves: Arrange all the leaves around the lamp holder screw according to your desired design.
7. Secure with the second ring: Tighten the second ring over the leaves to fix them firmly in place.

Manual Leaf Shaping

The leaves, with thicknesses ranging from 0.4 to 0.6mm, are designed to be hand-shaped right after detaching from the print bed. Apply light pressure between your index, middle finger, and thumb while gently rolling each leaf onto itself. Within seconds, once cooled, the leaf will hold its curved shape, adding dimensionality to the design.

Each leaf features a 28.2mm slot to fit securely around the lamp holder screw.

Customizable Colors

Flora offers endless color combinations. Choose translucent PLA for the outer leaves and matte shades like orange or olive green for the inner ones. Unique designs with cuts and colored veins on transparent bases are also available, creating soft and scenic lighting effects.

Technical Specifications and Print Settings:

• Recommended Material: PLA for its translucency and ease of shaping.
• Leaf Printing: Nozzle 0.4mm, layer height 0.2mm, 100% infill, 2 walls.
• Cup Cover Printing: Enable external brim.
• Tripod Printing: Nozzle 0.4mm, 25% infill, external brim, and automatic tree supports.
• Tripod Dimensions: M10x1 thread, 8mm height.