Phone Holder (with speaker holes)

I looked over the Thingiverse for a phone stand for my Oneplus, but they are not my liking. So I ended up design my own and I would like to share with all of you. It works perfect for my Oneplus and I am sure it will also fit most of the smartphones.

If your phone speakers are at the bottom, you will also benefit from the cutout speak holes from the stand.

You can use it in different way as they are illustrated from the attached photos.

Print instructions

Unassociated tags: phone charging stand

Category: DIY Print Settings

Printer Brand: RepRap

Printer: Prusa MK2

Rafts: No

Supports: No

Resolution: 200 microns

Notes:

I printed in PETG with 3 perimeters and 20% infill. I am sure PLA should work as well, may be even better because of less stringing while printing. The included STL file already has a support in the middle of the cut out slot. Support is about 0.2 mm apart from phone stand, so it should be very easy to break away from the stand. It depends on the tolerance of your printer, so take a great caution when you break this part off. Happy printing and enjoy.