Shelf Risers for Rise Gardens (Gen 3)

Grow large plants on all shelfs of your Gen 3 Rise Garden with these shelf risers. Add 152mm (6in) of grow height to the middle and/or top shelf of your garden giving them the same height as the taller bottom shelf. If you only have a 1-tier garden you can still use these risers if you want to give your plants some additional room to grow. 

If using for the middle shelf you will need to order two additional long drain tubes from Rise.

Compatible with 1-3 tire Gen 3 Rise Gardens. See my Risers for the Gen 2 Rise Garden.

Our other Rise Gardens Accessories 

Don't Have a 3D Printer?

We have them available for purchase at krayft.com.  

Printing Instructions

I printed all parts from PLA, but PETG would probably work well also.

RG-Shelf_Riser_Gen_3

• Perimeters: 3

• Infill: 20%

• Layer height: 0.2mm

Hardware

• 4x M5 Brass Heat Set Threaded Inserts (you will need 8x if you plan to install risers middle and top shelfs of a 3 tier garden).

• 4x M5 x 8mm Stainless Steel Screws (you will need 8x if you plan to install risers middle and top shelfs of a 3 tier garden).

• 2x Long Drain Tubes (only necessary if you are using the risers for the middle shelf of a 3 tier garden)

Installation Instructions

Use a soldering iron to install the 4x M5 heat set threaded inserts into the bottom of each of the risers.

PDF Installation instructions can be found in the files section.