MailBox Numbers II

Mail Box Numbers

I re-built my original design to now include a border around all edges of all numbers. These are designed to allow a color change for both the border and for the number.

The photos are from my original version - 

Never miss a delivered pizza slice again! These are easy to print “House Numbers”

I have provide 0 - 9 with both verticle and horizontal numbers.

I printed mine with Inland Black & White PLA - there are screw holes built right in, for a #6 screw. Mine are outdoors - They have now been out side, through rain and snow, for more then 5 months - they still look brand new!

I have provided the STLs for all numbers & types. I was able to print these on both an MK3 or MK4s with NO SUPPORTS!

To print your number (for a vertical), you will need a Top, some Centers, and a Bottom - just select the ones you need and get printing (Vertical sample below)!

For a horizontal set, You will need a Left, some Centers, and a Right side!

Let's say you want to print a Horizontal Number 3-7-9-5 - Just pick a “3” (left) - a “7” (center) - a “9” (center) - a “5” (right) - once printed, each of the plates will interlock for easy install.

Get printing! Look for my other files on Printables!

Please leave comments and makes!!!

NOTE: Some of the photos show a “top” & “bottom” piece that was printed separate and added to the numbers (for the finished top and bottom). That was my first design - I changed it (for the better) for both a better look, and easier printing!

This new version now look even better with the addition of the 2mm border on all edges.

Please see my other projects on Printables