iPad mini wall mount

Wall mount for an iPad mini designed for portrait display. I made this to mount as a control pad in our RV because the default touchscreen is awful.

The mount allows you to slide the iPad in and out from the top, and hides a standard charging cable. I included a hidden area to loop extra cord as well. Additionally, I added a cutout on the bottom in case you just want to run the cord straight out. I made this about 2mm larger than the iPad in the horizontal/vertical dimension so that it would slide in easily and accommodate a slim case if needed. There are 4 screw holes to mount it. Print face down and no supports are needed. I made this in PETG with 10% infill, but it should be fine in PLA as well.

Print Settings

Printer Brand:

Prusa

Printer:

**Rafts:** No

Supports:

**Resolution:** 200

Infill:

**Filament:** [ ](http://www.amazon.com/s?url=search-alias&field-keywords=SUNLU+PETG+&tag=thingiverse09-20)[ SUNLU](https://www.amazon.com/SUNLU-Filament-1-75mm-Printer-Black/dp/B07Q82HVTT?dchild=1&keywords=sunlu&qid=1618263029&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzRURLUURRQjZCS01DJmVuY3J5cHRlZElkPUEwODg0OTEzQlVYNklURjVBUFgwJmVuY3J5cHRlZEFkSWQ9QTAzNjgzNDZ&tag=thingiverse09-20) PETG gray How I Designed This ===================

Category: Tablet