![Raspberry Pi Case for a Pi Zero 2 W(H) with mounted UPS HAT (C) [updated] 3D Printer File Image 1](https://wsrv.3dprinterfiles.com/?url=https://media.printables.com/media/prints/1145322/images/8645813_60ef3c32-3151-4459-90df-e80098767540_e4fac271-4695-4bea-90e5-5cd78018878d/pxl_20250112_rasppicase_01.jpg&w=828&h=828&output=webp&q=100&n=40 "Raspberry Pi Case for a Pi Zero 2 W(H) with mounted UPS HAT (C) [updated] 3D Printer File Image 1")
![Raspberry Pi Case for a Pi Zero 2 W(H) with mounted UPS HAT (C) [updated] 3D Printer File Image 2](https://wsrv.3dprinterfiles.com/?url=https://media.printables.com/media/prints/1145322/images/8645814_f7994884-93e5-4f67-a6a4-d9bd8b6d6c55_8da719ca-cea1-41c1-86e2-50cc130476d6/pxl_20250112_rasppicase_03.jpg&w=828&h=828&output=webp&q=100&n=40 "Raspberry Pi Case for a Pi Zero 2 W(H) with mounted UPS HAT (C) [updated] 3D Printer File Image 2")
![Raspberry Pi Case for a Pi Zero 2 W(H) with mounted UPS HAT (C) [updated] 3D Printer File Image 3](https://wsrv.3dprinterfiles.com/?url=https://media.printables.com/media/prints/1145322/images/8645812_97c08bd5-f87c-4a5f-b4fe-1bbf38bc0882_7581b2cf-e264-4319-a86e-c4db14d79f2f/pxl_20250112_rasppicase_02.jpg&w=828&h=828&output=webp&q=100&n=40 "Raspberry Pi Case for a Pi Zero 2 W(H) with mounted UPS HAT (C) [updated] 3D Printer File Image 3")
March 13, 2026
Description
This is a base Raspberry Pi Case for a RaspberryPi Zero 2 W(H) with mounted UPS HAT (C) (Uninterruptible Power Supply including I2C) by Waveshare.
Update: replaced the connector doors.
Settings | Value |
|---|---|
Infill | 25% (adaptive cubic) |
Perimeters | 2 |
Layer Height | 0.15 mm Speed |
Material | PETG / PLA |
Supporting Material | only overhangs / organic |
Comments | |
Ironing | no (not needed, but creates a cleaner surface) |
Feedback is welcome.
Share your makes!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
SJM
