Strong Computer Legs Anti Dust BeQuiet Light Base & Dark Base Pro 901

Heyhooo

Here I have some legs for my PC Case so it is not that close to the floor any longer.

I have the problem that it is quite dusty in here and I wasn't able to clean beneath the PC.

So I designed these legs so the pc is a lot higher in the air and therefore it's less likely to attract that much dust.

The legs are designed to be strong and durable so they won't come off or break at all. Even if you drag around the computer.

Printing:
0,2 mm layer height, 25% Infill, 4 Perimeter, PETG (Or tougher) recommended.

Assembly & Hardware:
Dark Base Pro 901
For assembly you need 4 x M3 20 mm - 30 mm Screws per Leg.


 

Light Base:
It is necessary to screw the Base Plate to the feet by using 2 x M3 x 10-12 mm Screws. So you need 2 of that screws (Countersunk) + 2 M3 Nuts per foot.

Have fun (and less dust)!

Strength: 

1 Foot (PLA 2 Perimeter 15% Infill) Prototype was able to withstand my weight: 

Usability:

Of course it will pull less dust because it is not so close to the floor. Also you can clean beneath the computer: