Wheel of Fortune

things to print:

the nut

the screw

the stand

a wheel you like (more comming soon)

and a bearing size 6000(i didn't make one my self) 

i used this one: https://www.printables.com/model/561588-bearings-print-in-place-with-real-rolling-elements they came out great and they role great. you can also use a other model if you like.

the things you can't print:

a piece of tape

print setting i used:

i used for every thing:

layer height: 0.2 mm

perimeters: 2

infill: cubic 15%

support: none

brim: none

except for the wheel i used

perimeters: 3

for strength for the pins

assembly:

1. Put the bearing in the wheel.
2. Then insert the screw from the outside of the stand so the flat side.
3. Put the wheel with the bearing in the screw. 
4. Tighten the nut on the screw.
5. And put a little piece of tape on the pin of the stand. not to much so the numbers can't touch the tape.

I learned a lot from making this. Hope you like it  

Feedback would be appreciated, cause I am still a beginner.