Corner Mount Valve Index Base Station / HTC Vive LightHouse

This corner mount is designed to be small and easy to print as no support is required.

You will need two 4mm screws to anchor the mount to the wall. The Valve Index base station will attach to the mount with the original screws.

WARNING heat up the OEM screw if the hole feels too tight. PLA tends to snap if the load is too high.

Watch out! The screw holes on the base station mounting plate are not aligned to the center of the plate (great design Valve 🙄). Check orientation first or you will have to unscrew the corner mount and turn it 180 degrees. It will still work fine, just extra work.

Careful, the .3mf is for a MK3S with an E3D Nozzle-X

Requirements

• 2x 4x40mm screws and matching wall anchors
• 2x OEM screws or 2x 5x20mm screw to attach the original base to the bracket