January 7, 2022
Description
Made a Filament passthrough with M10 coupler to go though a 7 to 8.5mm thick enclosure roof.
Hole size to drill for fitting is 12mm
Print settings:
I recommend .15 due to how small they are, I would also advise supports for M10 coupler side. GCODE added with the Prusament PLA default profile with .1 support detachable
Post print:
The hole may need drilling out on both Male and female to 2mm depending on your print.
License:
Creative Commons — Attribution — Share Alike
7
SonicBroom
