Voron - HEPA + Carbon filter

Voron - HEPA + Carbon filter for the ORIGINAL CASE

The original part is 55mm deep, the standard Voron filter housing is only 44mm.

So we redid it so that we didn't have to print a big box for a big hepa filter,
we honestly didn't want to dismantle the original part.
Modified to the original case and used a smaller corresponding filter.

We used a filter from the “XiaoMi G1” which can be easily bought on aliexpress here.
The filter has dimensions: 130x40x8mm

We recommend cutting the tab, then it will slide into the case easily.
There is no need to disassemble the cover or fan for assembly.
That's all, simple and functional.

Printing parameters as for Voron.

Version 2B has a beveled rear right corner for the fan cable.