I Phone 11 Projector for Cookie Decorating or Drawing Copy

I Phone 11 Image projector for Cookie Decorating.

I struggle with text spacing and consistency so hopefully this will help.

I got a 1mm thick piece of plexiglass from Hobby Lobby about 8" x 10" for under $2.

To assemble, put the 4 cross-braces in through the three side panels. Then insert the plexiglass in the narrow slot. Lastly install the plexiglass supports in the wider slot under the plexiglass. The lower ends are designed to go behind the lower cross-brace for added reinforcement and stability.

You have to save your image inverted right to left if there is text since it is flipped in on the plexiglass. It will stretch it a little width wise so you may want to compress it a little in the image on the phone to get better proportions as projected.

White background seems to work best.

Then you look at the image on the plexiglass but pipe frosting or draw on the surface below.

Print Settings

Printer:

BIBO

Rafts:

Supports:

No

Resolution:

Infill:

33

Filament: Inland PLA+ Doesn't Matter Post-Printing

Trim if required.

How I Designed This

Designed in TinkerCAD.

Category: Food & Drink