added bigger version, no support needed, better hook stability
When:
when you have metal board with squared holes
when you want to hang on it any of your prints
especially when your print has its back side printed as first layer (so with this you avoid support of the back)
can be used with any of your prints for hanging on metal board
What to print:
you just print given keyhook
Dimensions:
this hook passes in metal board with squared holes, which are about 1cm wide
metal board thickness for this is up to 1mm
you can adjust these dimensions if you have different square holes or more/less thick metal board
the part of hook on which hangs any of your print - is in scale with negative element that I have provided.
this hook part is quite small (like the smallest i would suggest to print), but you can scale this part up - together with hole negative to be more reliable if you wish (and if you have more space inside of your print
Print instructions:
print only keyhook
put negative STL as negative object to any of your model - and given keyhook will fit in it nicely, so it can be hanged on it
note that in given sample of keyhook - given part is slightly off the bottom - so it needs support, when removed, it will not look nice, but it is the inner part of the hook, so it does not matter much
can be also adjusted when the hook will be modifed with hole negative, so it can be printed as a whole without support
sh
