FormD T1 Handle-Foot Mod 2025

This is a handle and foot mod for the ITX PC case FormD T1. It is visually simpler and easier to assemble compared to the 2024 design.

Required other than printed parts:

• 16x M3x8 Screws
• 16x M3 Nuts

Required printed parts:

• 8x Nut_bracket.stl
• 1x TopFront.stl
• 1x TopRear.stl
• 1x BottomFront.stl
• 1x BottomRear.stl

Assembly: 
1. Set an M3 nut into each nut bracket, placing two M3 nuts in each bracket.

2. Align the handle or foot with the appropriate position on the panel, insert the nut bracket from the back, and secure it with an M3 screw.

Notes:

• The part with the mark in the image is the front parts.

• It is possible to secure the nuts directly to the panel without using a nut bracket, but we recommend using the nut bracket to prevent damaging the panel.