Skalar San++ Pump Deck Handle

Scientific equipment replacement part:

This is a Replacement part for Skalar San++ Per-pump deck handle.

Skalar analyser product page: https://www.skalar.com/analyzers/automated-wet-chemistry-analyzers#samplers

I found the over sized springs on the pump deck allow the handle to break when allowed to drop into position. If the plastic cracks or breaks this is a great replacement option. 

Print settings: 

• Print with high wall lines counts (5+) for strength
  • Print is very strong and equal to or greater than the original part when printed with eSun PLA+ using 0.8 mm nozzle.
• Print with the side of handle facing down to bed, this allows supports to fill hole for center pin. 
  • Dig out the supports at the end. 
  • This printing orientation allows for highest strength in the required dimensions.

If you like this design, you can say thanks by buying me a coffee via Paypal: 

https://www.paypal.com/paypalme/moneysump