Honeycomb wall - AstroAI M6KOR Multimeter Holder

DESIGN INTENTS

• This is a remix of the well done AstroAI holder by jwnicolai
• I often use my multimeter directly from the holder (my work area is close) so I wanted to be able to keep the probes connected
• I added a side pocket so I don't have to attach the cables to keep things clean 

PRINTING PARTS

• Orientation: STL is already oriented correctly
• Support: none required
• Material: Any material will work
• Infill: 25% cubic
• Layer height: 0.2

ASSEMBLY

• Require 2 “Insert-with-M3.stl” from the HSW files 
• Use with 2x  M3x16mm (or 18mm)