30mm CNC Laser Fan strain relief.

Used on the 5.5W diode laser I have on my 1610 CNC, it goes over the 30mm fan on the top of the module and provides a channel to direct and strain-relieve the Diode and Fan lines.

A couple of indents are provided for cable-ties to secure the everything in place.

The fan clip itself is fractionally (0.4mm) oversized, I overestimated this and needed to use a bit of tape around the fan to get a snug fit, It might be worth scaling X&Y down by a percent or two to get a proper fit. It works well once securely fitted.

Category: Machine Tools