Wall Holster for Bosch eBike Battery Charger 36-4

A wall mounted holster for a Bosch 36-4 eBike charger so I dont keep kicking it around on the floor. Holds the charger pretty securely, it's not going to fall out.

Jan-2020 : I have uploaded a new version of this; with a clip to hold the charger plug when not in use. I also slightly updated the design to tighten the fit on the 'wings'. I have uploaded models for both left and right clips, plus a 'no clip' version.

• My specific charger has the part number 0 275 007 907, but I suspect this fits any of the 36v 4A chargers in the powerline range.
• If you have the 6A charger please check out: https://www.thingiverse.com/thing:5199326 This is a remix of this model for the fast charger.
• For reference, on my charger the base is 75mm wide and 170mm long. The top is 85mm wide and 50mm tall at it's maximum (measured from the base, not the feet).

There are two 5mm mount holes (+ recess and adjustment) for mounting but my target wall is 35+yr old reinforced concrete and I didn't want to borrow my neighbours SDS drill (again), so I also put a big base on it and have stuck to the wall with carpet tape..(strong stuff). I deliberately left a big air channel behind this to assist cooling.

• Thanks to @zlogg, who originally pointed out that thisdoes not work with the 36/6 fast charger models, it is designed for the 36/4 normal (4 amp) chargers.

PS: sorry for the awful lighting in the photos, my phone camera did not cope well with very black objects on a white wall.

Print Settings

Printer:

K280

Rafts:

**Supports:**

No

Resolution:

**Infill:**

20%

Filament: Real Filament PLA Black

Notes:

Category: Organization