January 16, 2025
Description
A swivel-pin adaptor and base mount for Raymarine Dragonfly series fishfinders, should fit both 4 and 5 series models since they use the same case, tested on my Dragonfly4. Provides a neater/smaller mount onto flat surfaces then the standard ball-joint adaptor.
Base has four M4 mount holes on a 60x70 grid, and takes a M6x60 bolt for the swivel.
The swivel piece mounts to the unit with a M6 hole sized to take the bolt from the standard Dragonfly ball-joint pin.
NOTE: After a first seasons use I have updated the Swivel component to make a firmer connection to the Dragonflies base.
The Westerly Nimrod adaptor is probably not needed, its for a 50 year old boat ;-) it allows me to put this over the keel slot during use.
Printer:
K280
Rafts:
No
No
Resolution:
0.2
10%
Notes:
I printed the swivel in TPU, and the base in PETG, but this would all print just fine in PLA or whatever, there is nothing complex in the objects, no support needed.
License:
Creative Commons — Attribution — Noncommercial
11
Easy Target
