10" inch wider Rack Modular Tray System for RaspberryPi (Tray)

For my wide 10" rack I made a model with a wider 258mm panel with wide holes for versatility.

Printed with PETG in one piece diagonally layed down to face - I got a good result.

PLEASE NOTE: that the height of the pyramidal panel latches was taken from the original model - and there is a problem there. I had to print the handles from the original project, disproportionately reduced in depth by 2 mm (then the distance to the latches decreased to ~1.5 mm and it began to latch well.