„Sign of the horn“ Dispenser

This is a variation from the „sign of the horns“ by dietz1 from thingiverse.

I made it just for fun for me and my best friend, because we always had discussions about who gets the first glass :-) maybe there are other people outside, they have the same problem :-))

 It only works with bottles that are called Rammazotti. Other bottles still need to be seriously tested….

You should print it with PETG and you still need a seal. I took a piece from a silicone mat.  It could also be a cork or something else that is food safe. The small tube with 2.8 mm outer diameter is absolutely necessary, otherwise it will not work! I have taken a Teflon tube for it. Possibly you must drill the admission for the tube larger, for other possibilities. Make sure that everything is food safe!
Cheers!

3 perimeter, 0.2 Layerhight, 10% infill, Procatec PETG, printtemp 236, bedtemp 70, you need support Material only for the innerside.

UPDATE: NO MORE NEEDED TUBE! PRINT IT WITHOUT SUPPORT AND ANYTHING ELSE. MAYBE YOU NEED A BRIM…