January 18, 2025
Description
I needed a case to hold my TS100 soldering iron and the heat set tips from CNC Kitchen. The case dimensions are based on the size constraints of one of my backpack pockets. I decided not to include storage for a power supply since I have another solution for powering all my travel devices.
As with all my multicolored designs, I print the details facing down on the build plate to give it a more professional look. The holder slots are designed to practically eliminate overhangs, so this should not be an issue. Assembly is simple, just press in 6x3mm magnets into the dedicated holes for them, ensuring you match opposite polarity from the lid and bottom.
Lastly, there's a small channel just beneath the iron for your hex key head to sit and the long-side will run along the channel under the iron tips.
Non-Affiliated Links
Polymaker Matte PLA Arctic Teal
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
TheSameNameTwice
