Brak Magnet (multi-color)(8x3mm magnets)

Pictured Examples printed on a BambuLab X1C (Textured PEI)

(ignore the defect. there were some weather-related moisture issues that caused some problems during the example print)

Face-down Print Settings:
Initial Layer Line Width: 0.4mm
Wall Generator: Arachne
Wall Loops: 1
Bottom Surface Pattern: Hilbert Curve
Infill: 15% (Gyroid)
Initial Layer Speed: 30mm/s

Coloring: Prints have at least two main objects that I usually set as white (base) and black (outline). Additional coloring was then added manually with the paint bucket and other tools.

Top
8x3 Magnet recesses to allow gluing in the magnets easily (magnet strip can be used instead)

Hope you enjoy!

(see my profile for other multi-color prints, as well as face-up manual color print designs if you don't have a multi-material option)