Eufy Homebase 3 Bracket

A bracket for the Eufy HomeBase 3 (S380). 
The bracket provides a wall clearance of approx. 5 cm so that the HomeBase's built-in antennas have sufficient space. 
There are ventilation slots at the bottom and rear and sufficient space for the mains plug and a network cable.

I recommend placing a support between the vertical ventilation slots. Otherwise they will start to vibrate when printing and the print will be unclean.

The nubs on the wall bracket may need to be filed down a little if the bracket cannot be fully pushed on and clicked into place.

0.2mm layer, 3 walls, 20% infill