Bait jar holder for fishing, now with lid holder option(s), plus adjustability (PowerBait, Gulp, etc.)

This is a simple holder for fishing bait jars such as Gulp, PowerBait, Shoepeg corn, etc. Designed to clip onto the fore-transom (not sure if that's a real thing) and places them out of the cockpit and out of the way, but very handy and accessible. The jars fit just loose enough to drop in and pull out without any resistance, but not sloppy. Designed to clip onto 1 1/8" thick frame. I suggest using ASA for outdoor exposure, but PETG also is an option (which is what I used because I don't have an enclosure). My settings were .4mm nozzle, .2mm layer height, and I used 4 perimeters to make the clip portion very robust. Print with either side on the print surface. I do use helper discs to fight lifting. They may not be needed. Also, no supports are needed at all.

Please post a make or any questions or comments! Thank you!

Update 2/3/25; added a model that includes a slot to hold the lid to the jars, if leaving the lid off is your thing!

Update 2/4/25; added a different arrangement of the jar and lid holders. Also, there is a file for this arrangement that doesn't' have the tension finger, but a separate file for the tension finger, so you can place where needed to accommodate different thickness of where these would be installed. See photos!

Please post any makes or questions or comments!