Kica JetFan 2 Lanyard Adapter

A modification of Axion's Jetfan lanyard adapter to make it fit the Kica JetFan 2. It can screw into either the intake or outake. 

You will need to drill a hole for the lanyard clip to attach to - so screw it on fully, mark where the hole should be, then remove it, drill and reattach. I put the centre of the hole around 7mm from the edge - this seemed a good balance between being able to get the lanyard attached, yet still plenty of plastic around it to keep it strong (see the last picture for my choice of placement).

For drilling, I found clamping the printed part in a vise and using a 4mm Brad Point drill bit to be effective.