Makita charger wall bracket with storage

These are brackets to allow you to mount your makita chargers to the wall. I have used them on model DC18RD and DC18RC. If there's more models I can't confirm these will fit.

Material: I used PLA, but just about any will work

Infill: 100% you can probably do less if you need

Perimeters: 4 or more

Supports: None

Screws I use ( HAND TIGHTEN ).

https://www.lowes.com/pd/Hillman-8-x-1-3-4-in-Silver-Zinc-Plated-Flat-Interior-Exterior-Wood-Screws-6-Count/3035668?idProductFound=false&idExtracted=true 

I have added storage areas for the original screw and rubber pad. This way if you decided to remove the brackets you will have the original hardware ready to reinstall. If you use this option you can put a piece of tape over the screw so it doesn't fall out while mounting. You will also need to cut out the sacrificial layer in the rubber foot storage hole, hobby knife works well. This ables good parts without using supports.

Please share pictures of the ways you use these brackets.

If you have any questions or suggestions let me know.