Cosmo - Friendly Desk-Bot

I made this guy kind of as a mini catch-all. I always have little parts and pieces laying around my desk. Dummy 13 hands and parts are printed fairly often over here due to a 5-year-old son lol.

You may need a small amount of support on the bottom-front side, there's a small lip where the face of the bottom extrudes out.

When inserting the legs hold both sides of the female part of the joint, and press is slowly. In order for there to be enough friction for it to stand i had to keep the leg pretty tight

The feet just slide right over the leg. Press firmly to make sure it slides all the way up the leg. If it feels loose, it may not be pushed all the way in.

------------------------------------------------------------------------------------------------------------------

All four legs can fold together into the bottom side of the body. Even though theres not many moving parts with this model there are many different poses you can make with this guy just by moving the leg into different positions.

**There is a pin that makes lining up the head with the body a piece of cake. However, you will probably want to use some super to keep the head on. The pin is really short to stop from obstructing the spherical cavity of the head.**

----------------------------------------------------------------------------------

Join my club for only $3 to gain commercial access to ALL my models.