Horizontal filament spool holder

Printed parts:

top                              1x

axis                             1x

rotating platform      1x

bottom                       1x

Other parts:

Wheel from old Ender printer         4x

Spacer from Ender under the wheel   4x

M5 bolt (30mm or more)                 5x

M5  nut                                               1x

Assembly:

1.Attach the bottom part to the desired location (using screws/glue/tape)

2. Glue the axle and turntable together.

3.Press the nut into the hexagonal hole inside the axle.

4.Screw the wheels and spacers to the rotating platform and place it in the bottom part.

5.Thread a spool of filament onto the axis.

Optionally

6.Screw the top part to the axis with a screw. (medel will work without this step)

7.If you use the model in a dry box, add silaca gel and drill a hole in the wall of the box for the filament.