Cosmo Planter Face Mod

Gives Cosmo some additional expresions and a face, which can be printed on its own. 
 

Printing:
Print all parts in the given orientation with 0.2 layerhigt. No support needed. A manual color swap for the faces gives a nice look to them.

Assembly:
Align the grooves on the lower side to each other and press the face in place, lower side first. 
Due to the top most layers of the rim (on the head) drooping ever so slightly during printing, the face is held in by its friction. If it does fell out on your print, add a drop of superglue.