Mask holder ski helmet grip optimized (FFP2) 16min

On my last skiing holiday I had the problem that I had to take off my helmet every time to put the mask on in the lift. The other option would be to wear the mask permanently, but then the ears will hurt at some point.

So I found a simple solution. You can easily fix this mask holder to the strap of your helmet lock and then simply attach your mask to it. In order to improve the grip, I have integrated small knobs.

Fixation

It is best to form a large tab with the strap and first push one side through the opening on the holder.

Now you pull hard on the pushed-through flap and pull the other side of the strap into the holder.

At the end all you have to do is adjust the holder.
 

Print description

In principle, you do not need any support for printing.

Filament: PLA is sufficient for this print. If the requirements for stability are higher, you can of course also use other materials such as PETG or PC-CF.

Layer thickness / mode: 0.2mm

Infill: 60%

Happy printing and have fun skiing!