BOSCH GST jigsaw - fixation of vacuum cleaner adapter for Bosch Click & Clean System

I decided to print this part in TPU because presumably, significant forces will act on the long, thin tube. The vacuum cleaner hose is also ribbed and often gets caught on the edge of the saw table, which also exerts forces on this part.

The red filament is Overture Highspeed TPU.
It doesn’t have particularly good TPU properties, and the color sticks in the extruder for a long time, but it prints well.

I originally bought it to print TPU/PETG combinations, but it bonds so poorly with PETG that I can use PETG instead as print support, which detach fantastically. The gray filament (support) is PETG.

The transparent part is a softer TPU 94A (purchased at: 'www.dasfilament.de'), which I use as a tensioning band to fix the adapter at the back of the saw. This makes the adapter work almost perfectly.

The part from Aragon is a little bit smaller than the width of the tunnel on my machine; without fixation it won't work properly.

I have the BOSCH Professional GST 18V-LI S (battery driven) jigsaw and the BOSCH GAS 18V-10 L vacuum cleaner with the Bosch Click & Clean System (C35)