February 3, 2025
Description
MKS PI board was designed by Makerbase to replace the Raspberry Pi to run Klipper firmware. Board allows for easy connection of an ADXL345 3-Axis Digital Gravity Sensor Acceleration Module.
The case houses both the MKS PI and MKS TS35 touch screen.
Information on the board and screen: https://github.com/makerbase-mks/MKS-PI
The MKS PI module needs 12-24v and the model includes DC Connector for external power supply.
The ADXL345 is a 3-axis accelerometer. The Molex 6-pin connector allows for the use of a cable for making the connection.
Parts required:
4x M3x12 mm hex head screw (for TS35 Top)
2x M3x8 mm hex head screw (for Mount)
2x M3x6 mm hex head screw (for MKS PI)
1x DC Power Female Socket Panel Mount Connector, 3 Pin 5.5x2.1mm
1x Push Button Switch 10x15mm SPST 2Pin
1x JST connector for the MKS Pi 12/24v power connector
1x Molex 6-pin connector board (optional) from 3dmachinist.etsy.com
Printer Setting:
Infill: 25%
Support: Yes, Tree
If you would like to buy me a cup of coffee.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
mfetting
