Resin Filter - Screw on Bottle - fully printed

I did not want to buy lots of filters for filling back left over resin and wanted a mechanically stable solution for filling it back into the UV-safe bottles. So I created this model where it is possible to specify how fine to filter the resin.

Tested filter settings (On the "ResinFilter.stl_1_2 entry in the 3mf file, set the fill density as written):

• 60% infill for filter (this is the green one in the pictures)
  Works great for me.
• 80% infull for filter (this is the red one in the pictures)
  Is a little bit too fine for my liking.

Print settings:

- Material: PLA
- Nozzle: 0.4mm
- Layer: 0.15mm
- Profile: 0.15mm speed
- Supports: no

Made with passion by Xargas! Like what you see? You can support my work and help me create more awesome stuff via club membership or by purchasing one of club models.