Senseo BIG Cup Lowering Plates

Senseo BIG Cup Lowering Plates:

Bigger cups don't really fit under these Senseo machines as shown in the pictures below. 

You always have to tilt them to get them out of the machine outlet which can create a mess:

Removing the cover where the cups used to be placed on and position the cup below the cover is also not convenient because the cup can tip over and you will need to hold it manually:

My idea to this problem are these little Senseo BIG Cup Lowering Plates in 3 thickness sizes:

• 5mm
• 7.5mm
• 10mm

which you can use to create a straight stand in the tray to position the BIG cups stable:

Depending on the height of the cup you can add or remove one or 2 plates to fit your cup size.

With hat the bigger cup can be placed stable under the outlet and you can pull it out easily:

To cover the machine up after usage simply place the original cover over the plates again:

Printing instructions:

• 0.2 speed profile used
• No supports needed
• No brim needed

Happy printing =)