Side View 3DO Enclosure Cam for the RatRig VC4

Hello!

Here is a little mount for the 3DO enclosure camera kit v2 that allows to have a side view of the print area by placing the camera in the area of the belt tensioner.

BOM:

• 3DO Enclosure Camera Kit v2

• 2 x M3x12 hex skrews;

• 1 x M3 nut;

• 2x M2x8 countersunk skrews;

• reuse the original M6 skew and t-nut from the replaced right Y bumper.

An exploded view of the components to aid with assembly:

A few notes:

• Pay attention to the white dots on the PCB, FCB cable and camera module, they should align when connecting the different components togheter.

• The camera module is friction fit into the mount, adjust scalling in your slicer in case it does not work out for you.

• Slighty tighten the bolt for the socket in order to be able to move the camera module into position after installing everything, tighten it a little more so that it does not move from vibrations.

If you enjoy my designs and want to support me, you can buy me a coffee here.