SCART Brace for RetroTINK 2X-SCART Scaler

SCART. It delivers fantastic crispy video, but the gentlest breeze will knock the connector loose. Keep the SCART connector in place on your RetroTINK 2X-SCART with this SCART-Brace.

This is designed to be compatible with standard generic SCART heads. It will not fit over larger heads such as those held together with screws, and metal heads.

Printing:

• Use Duramic 3D PLA or equivalent
• 0.4mm nozzle, 0.2mm height, 15%+ infill, 2+ walls
• No brim or supports necessary

Assembly:

• Insert your male SCART cable into the 2X-SCART.
• Drop the SCART-Brace over the enclosure.

Revision Log:

• Rev0 - Initial release

Note: Amazon links are affiliates.