Guitar Pickguard Pickup Switch Slot Routing Jig

Designed to use with these two rotary tool router bases:

• For metric thread machine: https://www.printables.com/model/1156447-rotary-tool-dremel-like-router-base-with-metric-th
• Machine with Dremel thread: https://www.printables.com/model/558275-dremel-router-attachment-screwing-cappabilities

Usage:

1. Attach the jig to the pickguard trough the switch mounting holes.
2. Tilt the router so that the router bit doesn't touches the pickguard and lean it to the shorter side or the jig.
3. Turn on the tool.
4. Level the router while the base is constantly touching the sort and the long guide rails. It will drill into the material.
5. Route the slot sliding the tool along the longer side of the jig.
6. Turn off the tool.
7. Lift the router.
8. Remove the jig.
9. Done :)

Watch your fingers!