Creality K1 Wall Anchor

K1 wall anchor using the honeycomb structure on the back to attach the printer to the wall to reduce vibrations. Greatly reduced vibrations for me

Anchors fit snug into the honeycomb structure

Drill and mark the holes on the anchor wall plate

I used a plywood wall stringer/backplane that was screwed into studs. I then screwed the printer anchors into the stringer

Printer can be easily removed and reattached to the anchors

Distance from the wall when anchored is approximately 89mm or 3.5 inches

Printed with ABS

3 walls

25% infill

Note, these are not a full printer wall mount, the printer still needs to be supported by a desk or surface next to the wall