Claw hooks with small trinket shelf for Skadis - Minimal Supports - Credit to @LayerCake for mounting system

I needed a strong hook setup that looked good for my Skadis boards. Figured I'd add a small trinket shelf to it so that I could put small change there, etc..

I used the mounting system from @LayerCake as it's the best one I've found and very well thought out.

This will print flat with only support required for the open cavity. Support generation should be set from the bed only so that a slicer doesn't do anything strange.

My print is in white ABS on a Qidi X-Max 3.