January 24, 2025
Description
Reel for quick filament change. No rewinding required. Designed for leftover filament or filament samples.
Easy handling. Remove sidewall, insert filament, snap on sidewall.
Sidewall held in place by magnets. 12pcs of 6 x 2mm magnets need to be glued in.
Printed from PETG.
Sidewalls are printed with 0 bottom and 0 top layer settings. 6 perimeters. Hexagonal filling about 15%. According to your decision.
Centre section with standard setting of lower and upper layers, 3 perimeters, normal fill 15-20%.
GCODE created for Průša MK3S
Outer diameter 160mm, centre diameter 70mm, width 56mm.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Jindřich
