Geometric animal Keychains

Print profile is includes all 9 animals (splited on the 3 beds).

• Selection and printing is entirely up to you. So like is the color settings, use whatever colors you want ;).
• Each keychain is made up of two different objects, which have assigned colors in the profile.
• The last (flat) layer of the model has set a “Hilbert curve” surface. 
• Geometrics lines are then “Monotonic”.

The dimensions of the keychains are listed below, height of the models is always 2.5mm! (total total 15 layers 2.44mm = the geometric lines are always the last three layers). You can reduce keychain, but only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct.

Print settings:
Nozzle 0.4mm, Base layer of 0.2mm, layer height 0.16mm, 2 walls, 15% infill.

If you use STL, here is swap Instructions:
Start with first color and at layer #13 (2.12mm) swap to second color for the rest.

Models size:

Deer         62x69mm
Unicorn     75x63mm
Fox        48x74mm
Swallow        65x71mm
Hummingbird    74x62mm
Owl        56x73mm
Whale        77x48mm
Bear        76x46mm
Cat        63x62mm