November 4, 2022
Description
This is a cup holder that uses 2 existing screws to mount to the side of the arcade cabinet. This is ONLY for the V1.1.
Mirror the print to get Left/Right side
Print Settings (I included a PrusaSlicer project file that works well for me)
Material: PetG or ABS
Layer Height: .2 or .3, prints great in .3
Supports: REQUIRED! Build plate only and exclude the 2 sections at the top that can be bridged easily(see project file)
Support type: SNUG
Perimeters: 3
Infil: 30% or better + Grid
Bridge Angle: (Print settings, Infil, Bridge angle[advanced]) 180 this will vary depending on how you orientate it on your build plate, however 180 is what got the bridging in the right direction for the top layers. (or just use the project file…)
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Jason
