Chevy Bolt Wiper Arm Nut Cover

This part was missing on my car.  I tried a few different variants but settled on this one; the two “()” shapes press fit over the outside of the nut.

I've uploaded two files here:

1. Bolt Wiper Arm Nut Cover.3mf - Solid Design
2. Bolt Wiper Arm Nut Cover (w. Circle).3mf - This one has an added circular design detail which you can print in a different colour if you want.  If you don't want that, use the other file.  To print this, you'll have to make two G-Code files and print them sequentially.

Print in PETG with the flat side facing down.  No supports required.  I'd recommend:

• 4 Perimeters
• 100%/Solid Infill
• 0.2 mm Layer Height