Bosch eBike Compact (2a) Charger Hanger

⚠️ Important! This model works with the 2 amp “compact” Bosch charger model BCS230. Please check the following picture and make sure your charger matches.

➡ Do you have the larger 4 amp “standard” charger? Click here to go to the variant!

About this model

I use an eBike for commuting and errands, and got tired of needing to grab a dirty charger plug on the ground.

With this print, your charger will stay clean and the cables will be accessible and out of the way!

Benefits of this model, over others:

1. Ceiling or wall mount.
2. Non intrusive  (no need to remove screws on charger)
3. Uses less filament, faster to print, fits on mini+!

Print tips

1. 🧩 2 parts: Clip and hanger. Print separately for cleanest finish.
2. ⮑ Print the hanger with the holes up, and print the clip on its side.
3. ✨ Support free!
4. 🏋️ Default (15%) infill
5. ☀️ Use PETG for mechanical strength.

Assembly

 1. Slide down clip from top, hold in place

 2. Insert one side of hanger into clip, making sure to align holes

 3. Insert other side of clip. It should be a tight fit. Done! ✨

How to mount

1. From the ceiling
   1. ⚠️ Safety first: Make sure you drill into a stud or at least use a drywall anchor. It's possible that your bike tips over and tries to take the charger with it!
   2. Adjustable height
      1. Eye hooks
      2. Paracord
      3. Cleat Hook
   3. Fixed height
      1. Just a simple eye hook + paracord, then tie a knot will do!
2. On the wall
   1. A nail or screw will do just fine!
3. Quick release
   1. Try connecting with a carabiner