6cm wide Mini Sanding Block

The big wedge at a width of 6cm. Also has been made 2cm longer.

You will need 2 M6 30mm screws and 2 nuts.

It is designed to be used with ~28cm x 6cm sanding paper. You should be able to cut a standard A4 sanding paper varies from 28cm to 29 cm in length and 21cm to 23cm in width in 3 or 4 stripes.

There is a alternative clamp plate which needs a M6 16mm Screw with Round Head and Inner Hex. More ergonomic, but not toolless. This print does not need additional support. Use a 10mm beton drill to remove the one-layer-support in the hole.